Demark Fully Automatic Drinking Water Pet Bottle Blow Molding Machine
The drinking water bottle blow molding machine is a cutting-edge production tool that is designed to manufacture high-quality water bottles. It is a fully automatic machine that uses advanced technology to ensure a fast and efficient production process. The machine is made of high-grade materials that are engineered to withstand extreme pressure and temperature. It boasts an ergonomic design that allows for easy operation and maintenance.
Drinking water bottle blow molding machine is equipped with an advanced control system that enables users to adjust the parameters and settings of the machine to suit their specific needs. It can produce bottles of different sizes, shapes, and designs, including custom designs as per user specifications. Additionally, it features a highly precise mold system that ensures accurate and consistent bottle shapes regardless of the production volume.
Working process as follows:
Put performs into hopper → Elevator send performs to arraying system → Array the preforms → Perform loading → Preform heating → Robot put the heated performs into moulds Lock the moulds and start blowing → Finish blowing→ Robot takeout the bottles → Bottle outlet
The electric control system can make control of automation,carrying out strict control in the process of elevating, arraying, loading, heating and blowing. Human interface achieves central control.
Working principle of blow molding machine:
Main wheel of equipment rotates in high speed. The encoder at the top of equipment and sensors installed on the main wheel test the angle of rotation and give computer feedback. Then in accordance with the operator of the procedures it set (angle) issued directives to executing agency(electromagnetic valve). The implementation process of blowing on a specific time, resulting to complete the process of a two step blowing and produce qualified products in rotating equipment.
| ITEM |
UNIT |
DMK - R16 |
| Productivity |
bottle/h |
32000 |
| Volume |
L |
0.2-0.65 |
| Material |
|
PET |
| Max .diameter |
mm |
65 |
| Max . height of preform |
mm |
145 |
| Max . height of bottle |
mm |
250 |
| Power |
|
380V50Hz |
| Installation power |
KW |
5.5 |
| Oven installation power |
KW |
250 |
| Elevator power |
KW |
1.5 |
| Actual total power |
KW |
120 |
| Cavity |
|
16 |
| Blowing air pressure |
kg/cm3 |
30~40 |
| Blowing air flux |
m3/min |
16 |
| Working air pressure |
kg/cm3 |
7~10 |
| Working air flux |
m3/min |
8 |
| Dimension of main machine |
mm |
2.78 × 4.4 × 2.91 |
| Dimension of oven |
mm |
4.4 × 2.39 × 2.57 |
| Weight |
T |
18.5 |
1. Automatic feeding device
Preform will be feeded and listed automatically.The device can adjust the preform quantity according to productivity, start and stop feeding automatically. To maintain uninterrupted feeding and not aggregate.It can adjust its output speed according to different preform type, so that preform feeding quantity coincide with production.
2. Heating machine
There are specially designed ventilation cooling devices and protective plate cooling water cooling in heating machine.Protecting the protection board and external when the temperature is too high. Thermal wind is controlled by frequency adjustable fan. Make sure the preform neck will not distorted by heating and increase the penetration, extend the life of infrared lamp at the same time.
3. Special mould plate system
Specially designed mould plate system make ensure that the replacement of the mould can be do quickly, accurately and good interoperability. Mould plate has pressure balance device. When blowing the bottle, it can make minimum of spew line, ensure the quality and performance of bottle. Special designed seal make low pressure when preform mouth connected with sealing mouth, and will not damage preform mouth.
4. Robot Device
Unlike the old mechanical gripper, the new one does not have a long spring. The use of double groove blank bottle pick-up and delivery cams, optimised robot structure, increased process angle, good synchronisation and coordination, good repeatability of movements, more flexible bottle blowing and lower losses.
1. Air compressor without oil: supply needed working pressure in the normal working(0.8Mpa) and high pressure for completing high pressure blowing.
2. Water chiller: The cooling system consist of cooling tower supplies cooling effect for air compressor without oil, blowing machine, hot water chiller and temperature control(oil).If the bottle is for water or carbonated, the cooling tower supply cooling water for buttom bottle mould and bottle mould; It needs hot water machine and temperature control(oil) if it is hot-filling bottle.
3. Hot water machine: the function is supplying steady hot water for buttom of mould, make the buttom of mould have steady temperature, ensure the blowing temperature.
4. Temperature control: the function is mainly provide a stable temperature for bottle body mould, make crystal of bottle material, meet the hot-filling requirements for bottle distortion. Heating media used in temperature control is industrial heat conductivity oil.
The drinking water bottle blow molding machine is highly energy-efficient, and it comes with several safety features that ensure optimal working conditions for both workers and the machine itself. It is the perfect tool for companies looking to produce high-quality water bottles in large quantities. Its durability, efficiency, and precision make it a popular choice among manufacturers in the beverage industry.
){kind=link}