Demark Full Automatic Edible Oil Pet Bottle with Handle Blow Molding Machine Production Plant

• Type: Stretch Blow Molding Machine
• Automatic Grade: Automatic
• Warranty: 1 Year
• After-sales Service: Provided
• Bottle Volume: 3L-10L
• Rated Capacity: 2000 Bp/H-6000 Bp/H
• Model NO.: DMK-RBL6
• Bottle Type: Round or Square
• Raw Material: Pet
• Transport Package: Wooden Case
• Specification: Stainless Steel
• Trademark: DEMARK
• Origin: Huzhou, China
• Production Capacity: 2000 Bp/H

Product Description

Product Description

 

Demark Full Automatic Edible Oil Pet Bottle With Handle Blow Molding Machine 

This series of products are mainly developed for the market demand of edible oil and condiments. Customized handle bottle blowing machine and oil bottle machine can blow front and rear handle bottles and large-capacity oil bottles such as five liters, ten liters, and twenty liters. , especially the large-capacity oil bottle blowing machine adopts the design of centralized heating and distance blowing, which can effectively save you production costs and improve production efficiency.

Working Process

Working process as follows:
Put performs into hopper  →  Elevator send performs to arraying system  →   Array the preforms →  Perform loading  →  Preform heating  →  Robot put the heated performs into moulds Lock the moulds and start blowing   →  Finish blowing→   Robot takeout the bottles → Bottle outlet    

The electric control system can make control of automation, carrying out strict control in the process of elevating, arraying, loading, heating and blowing. Human interface achieves central control.

Working principle of blow molding machine:
Main wheel of equipment rotates in high speed. The encoder at the top of equipment and sensors installed on the main wheel test the angle of rotation and give computer feedback. Then in accordance with the operator of the procedures it set (angle) issued directives to executing agency(electromagnetic valve). The implementation process of blowing on a specific time, resulting to complete the process of a two-step blowing and produce qualified products in rotating equipment.

Technical Parameters

ITEM	UNIT	DMK - RBl6
Productivity	bottle/h	2000 BP/H
Volume	L	3-10
Material		PET
Max .diameter	mm	220
Max . height of preform	mm	≤160
Max . height of bottle	mm	≤380
Power		380V50Hz
Installation power	KW	240
Cavity		6
Dimension of main machine	mm	3.6×3.5 ×3.7
Weight	T	16

 

Internal Structure

Technical Advantages

1. Automatic feeding device

Preform will be feeded and listed automatically.The device can adjust the preform quantity according to productivity, start and stop feeding automatically. To maintain uninterrupted feeding and not aggregate.It can adjust its output speed according to different preform type, so that preform feeding quantity coincide with production.
 

2. Heating machine

There are specially designed ventilation cooling devices and protective plate cooling water cooling in heating machine.Protecting the protection board and external when the temperature is too high. Thermal wind is controlled by frequency adjustable fan. Make sure the preform neck will not distorted by heating and increase the penetration, extend the life of infrared lamp at the same time.
 

3. Special mould plate system

Specially designed mould plate system make ensure that the replacement of the mould can be do quickly, accurately and good interoperability. Mould plate has pressure balance device. When blowing the bottle, it can make minimum of spew line, ensure the quality and performance of bottle. Special designed seal make low pressure when preform mouth connected with sealing mouth, and will not damage preform mouth.
 

4. Robot Device

Unlike the old mechanical gripper, the new one does not have a long spring. The use of double groove blank bottle pick-up and delivery cams, optimised robot structure, increased process angle, good synchronisation and coordination, good repeatability of movements, more flexible bottle blowing and lower losses.

Technical Features

1. Air compressor without oil: supply needed working pressure in the normal working(0.8Mpa) and high pressure for completing high pressure blowing.
2. Water chiller: The cooling system consist of cooling tower supplies cooling effect for air compressor without oil, blowing machine, hot water chiller and temperature control(oil).If the bottle is for water or carbonated, the cooling tower supply cooling water for buttom bottle mould and bottle mould; It needs hot water machine and temperature control(oil) if it is hot-filling bottle.
 

 

3. Hot water machine: the function is supplying steady hot water for buttom of mould, make the buttom of mould have steady temperature, ensure the blowing temperature.
4. Temperature control: the function is mainly provide a stable temperature for bottle body mould, make crystal of bottle material, meet the hot-filling requirements for bottle distortion. Heating media used in temperature control is industrial heat conductivity oil.